A blue screen of death means Windows hit a problem it could not recover from, so it stopped rather than risk your files. Windows also calls it a stop error, and most people know it as the BSOD: the blue screen with the sad face and a stop code on it. It sounds dramatic, and “my computer keeps crashing” is alarming, but the blue screen is a symptom rather than a diagnosis: the stop code on that screen is the clue that points to the cause.
These are the seven mistakes we see people make when a blue screen of death appears, and what to do instead. None of them need a computer science degree, and most take under ten minutes.
What is a blue screen of death, in plain English?
A blue screen of death, usually shortened to BSOD, is what Windows shows when it hits a problem it cannot recover from safely. Rather than carry on and risk your files, it stops and puts the stop code on screen.
The blue screen is a symptom, not the disease. Behind it is usually one of a handful of things: a faulty or outdated driver, a Windows update that went wrong, overheating, failing memory, or a storage drive starting to fail. Windows 10 and Windows 11 both show the same kind of screen, and both record the stop code so it can be looked up later.
If it happens once, note the stop code and see whether Windows starts normally. If it keeps happening, or your computer keeps crashing and restarting, work through the checks below before changing anything.
What should you try first?
Take these steps in order when a blue screen of death appears. If the computer is stable enough to start, back up important files before attempting repairs.
- Photograph the blue screen. Capture the stop code and any driver or file name shown, like a
.sysfile orntoskrnl.exe. - Back up important files if you can. Copy essential documents and photos to a separate drive or trusted cloud storage.
- Note when the crash happens. Write down whether it occurs while starting Windows, during a particular task, or at random.
- Think about recent changes. A new app, driver, update or connected device may be relevant.
- Try one restart. If Windows starts, avoid repeatedly restarting just to see if the same error goes away. If your PC keeps restarting before Windows even loads, stop there and get advice.
- Use Windows Update or the device maker’s support page for updates. Avoid unfamiliar driver tools and “PC cleaner” downloads.
Microsoft’s guide to unexpected restarts and stop code errors also recommends noting the error and checking for recent changes.
What causes a blue screen of death?
In a home or small-office computer, a blue screen of death usually comes back to one of six causes:
- A driver that is not compatible with your version of Windows, or one that was updated and broke something.
- A Windows update that did not install cleanly.
- Failing or mismatched memory (RAM).
- A hard drive or SSD starting to fail, which often shows up as a boot loop rather than a one-off crash.
- Overheating from dust, a blocked fan or a laptop used on a bed.
- In a desktop, a power supply that is on its way out.
The stop code on the blue screen usually narrows it to one of those groups. That is why the code matters more than the fact that the screen appeared.
Why does my computer keep crashing and restarting?
When a Windows computer keeps crashing and restarting, you are usually looking at one of four things: a driver that is not compatible with your version of Windows, a failing memory stick, a drive on its way out, or heat.
The pattern tells you which. A restart seconds after boot points at Windows files or the drive. A crash after twenty minutes of gaming points at heat or graphics. A random crash in the middle of ordinary typing points at memory or power. Record that pattern before you change anything, because once you start installing updates and swapping parts you lose the evidence.
1. Are you assuming the blue screen means your computer is finished?
A blue screen of death doesn’t tell you by itself that the computer is beyond repair. A faulty driver or a Windows problem may be fixable; a failing memory stick or drive may also be replaceable.
The stop code is a useful clue, but it may not identify the cause on its own. A technician will consider the code alongside the timing, recent changes and condition of the computer. If Windows still starts, take note of the code and any named file before it disappears.
2. Are you missing the stop code on the BSOD?
The stop code, sometimes called a bug check code, is easy to overlook when you’re focused on getting your computer working again. But a clear photo can save time: without it, the person troubleshooting has less information and may need to reproduce the crash or check Windows’ records.
Look for a line such as MEMORY_MANAGEMENT or INACCESSIBLE_BOOT_DEVICE. These names aren’t a diagnosis by themselves. Record the exact wording, including any file name, then note what you were doing when the screen appeared.
3. Are you turning it off and on repeatedly?
One restart after a crash may be reasonable. Repeatedly switching the computer off and back on, hoping it will eventually work, is not a reliable fix: particularly if Windows crashes while loading.
The timing matters. A crash during startup may point to a different problem from one that appears after an hour of gaming or office work. If it fails at boot, stop trying repeated restarts and record what you see. If the screen is stuck, use the computer maker’s shutdown instructions rather than repeatedly cutting power.
4. Are you installing the first driver updater or PC cleaner you find?
A search result promising to “fix all errors” can look tempting when a computer keeps crashing. But unfamiliar driver updaters and PC cleaner tools can add unwanted software or make changes that create new problems.
Start with Windows Update or the support page for the computer or component maker. If the crashes began just after a driver or program was installed, that timing is worth investigating. Avoid changing several things at once: it makes it harder to tell what helped, or made the problem worse.
5. Are you ignoring when the blue screen of death happens?
A crash pattern can narrow down what to check. Keep a short note of the activity and time before each Windows crash, because the timing is often more useful than the stop code on its own.
- During gaming or video work: heat or graphics-related problems may be worth checking.
- During a Windows update: Windows files or a driver change could be involved.
- At random or during ordinary use: memory, storage or power problems are among the possibilities.
- Only after connecting a new device: disconnect it, if safe, and see whether the pattern changes.
These are clues, not a certain diagnosis. For example, a PC that crashes during games could have more than one cause. If it also runs unusually hot, see our advice on 5 signs your computer is crying out for repair.

6. Are you overlooking obvious hardware problems?
An older desktop or laptop can crash because a part is loose, worn or overheating. Dust blocking airflow, failing memory or a storage drive developing faults are all possibilities. A desktop may also have a tired power supply.
You can check that the vents are clear and the computer has room to breathe. If you’re comfortable doing so, shut down and unplug a desktop before checking that external cables are firmly connected. Don’t open a laptop or desktop if you’re unsure how to do it safely; internal parts are easy to damage.
If the computer won’t turn on at all after a power problem, our guide on why your computer will not turn on after a power outage covers some first checks.
7. Are you trying fixes before backing up?
A recurring blue screen of death may be an early warning of a storage problem. If the drive is failing, more troubleshooting can put important files at risk.
If Windows still opens, copy your essential documents and photos to another drive or a trusted cloud account before attempting repairs. Don’t save the only copy of your backup to the same computer. If Windows won’t start, or you hear unusual noises from a desktop hard drive, stop and get advice before running repair tools or repeatedly trying to boot.

Is the computer worth fixing or replacing?
It depends on the computer’s age and condition, the fault and the cost of the repair compared with a replacement. A blue screen of death on a nine-year-old machine that also runs hot is a different decision from one on a laptop bought last year. A failing drive or memory stick can often be a worthwhile repair. A motherboard fault on a nine-year-old computer may not make financial sense, especially if other parts are also worn.
If the drive is failing, recovering important files may be the priority, not getting the computer running again at any cost. We’ll explain the options in plain English and tell you when we don’t think a repair is worth doing. If a slow computer is part of the problem too, read what actually fixes a slow computer.
Can a blue screen of death fix itself?
Rarely, and not reliably. A single Windows crash can be a one-off: a driver that crashed once under load, or an update that installed itself and then corrected. If it happens once and never comes back, there may be nothing to do beyond keeping the stop code somewhere safe. If it returns a second time, treat it as a pattern and work through the checks above.
Is a blue screen of death dangerous?
Not to you. A BSOD is Windows stopping itself, not a virus warning and not an electrical fault. The risk is to your work and your files: anything unsaved is lost, and a machine that crashes mid-document or mid-call costs you time. If the drive is also failing, the real risk is to the photos and documents that only exist on that computer.
Which BSOD stop codes come up most often?
You don’t need to memorise them. MEMORY_MANAGEMENT and PAGE_FAULT_IN_NONPAGED_AREA usually point towards memory or a driver. INACCESSIBLE_BOOT_DEVICE points at the drive or the way Windows is trying to start. CRITICAL_PROCESS_DIED is often Windows files or storage on its way out. The code narrows the search. It is not the answer on its own.
Windows also keeps a record of every crash, which is how a technician can look back at a pattern rather than a single blue screen.
Where does Windows keep the record of a crash?
Every blue screen of death writes a small crash dump file, and Windows logs it in Event Viewer under Windows Logs then System, filtered to Critical and Error. A technician reads that record to see whether the same driver or the same stop code appears each time, which is the difference between guessing and knowing.
You can look at it yourself if Windows still starts. Search for Event Viewer in the Start menu and filter by date around the crash. You will not always understand the entries, and that is fine: the date, the time and the repeating name are the useful part when you describe the problem to someone.
There is a second record too. Windows keeps small crash dump files, and a technician reads those alongside Event Viewer. If a system restore point exists from before the crashes started, restoring to it is one of the quickest tests for whether a driver or update caused the trouble. A disk check (chkdsk) is the equivalent test for the drive.
Can you fix a blue screen of death in safe mode?
Safe mode starts Windows with a minimal set of drivers, so it is a useful test. If the crashes stop in safe mode, that points at a driver or something installed recently rather than failing hardware. If it blue screens in safe mode too, or will not reach safe mode at all, the suspicion shifts to RAM or the drive.
Hold Shift while choosing Restart from the power menu to get into it on Windows 10 and Windows 11. Then pay attention to what happens next rather than changing a dozen settings at once.
When should you call a technician?
Get help if the blue screen of death keeps coming back, Windows won’t start, or you’re worried the drive is failing and your files aren’t backed up. It’s also sensible to stop if the computer gets unusually hot or you’re not comfortable opening it to check hardware.
Mr IT is based in South Melbourne and provides onsite support across Melbourne. We can also help remotely with suitable software issues. We’ve helped more than 1,557 Australians since 2009, and our rate is $187 per hour including GST, with no call-out fee. Within the first hour, we explain what we’ve found and give you a clear quote for further work; additional labour and parts only go ahead with your approval.
We look after homes and small offices alike, so if a blue screen of death is interrupting work rather than homework, our Wi-Fi and network support page also covers ongoing support arrangements.
If a blue screen of death keeps coming back, your PC keeps restarting, or you are worried about the drive, our computer repairs in Melbourne service page covers what a visit involves.
Visit mrit.tech to book computer repairs or tech support anywhere across Melbourne for your home or small office.